Events
Exhibitor Workshops
Each exhibitor showcases cutting-edge technology and solutions based on various themes.
*The content of workshops can be changed without notice.
*Please contact each exhibitor for the content of the workshop or registration procedures.
November 1 (Thu.) November 2 (Fri.) November 3 (Sat.) November 4 (Sun.) November 5 (Mon.) November 6 (Tue.)
Japanese(including interpretation) 
English
13:00～14:00
A2-① E5053:
YONEZAWA KOKI CO.,LTD.
【Workshop name】 Sharing of current issues about IoT＆AI in manufacturing
【Lecturer】 Hiroyuki Kumagai,Principal Consultant, Industry Business Development Unit, FUJITSU LIMITED.
13:00～14:00
A3-① E2011:
Makino Milling Machine Co.,Ltd.
【Workshop name】 Proposal for stamping die production for car components
【Lecturer】 Mold project sales section Domestic sales department Manager Itsusei Kurosaki
15:00～16:00
A3-③ E6013:
KURAKI CO., LTD
【Workshop name】 Efficiency of profile milling for injection molding die by horizontal machining center
【Lecturer】 Yuki Akiba
15:00～16:00
A3-④ E5030:
Computer Engineering & Consulting, Ltd.
【Workshop name】 Introduction of IoT at processing site and data utilization by wearable terminal
【Lecturer】 Hiroaki Matsui,Digital Industry Business Group First Sales Division
605 Conference Room
A2-① E5053: YONEZAWA KOKI CO.,LTD.
【Workshop name】 Sharing of current issues about IoT＆AI in manufacturing
【Lecturer】 Hiroyuki Kumagai,Principal Consultant, Industry Business Development Unit, FUJITSU LIMITED.
| 【Application Method】 | Please visit our website (Click here) |
606 Conference Room
(+81)-45-478-2700 A2-② W3100:
SKF Japan Ltd.
【Workshop name】 The next generation of Predictive Maintenance
【Lecturer】 B D Ann
15:00～16:00 A2-② W3100: SKF Japan Ltd.
【Workshop name】 The next generation of Predictive Maintenance
【Lecturer】 B D Ann
| 【Application Method】 | Please contact us by email (skf.japan@skf.com） |
605 Conference Room
A3-① E2011: Makino Milling Machine Co.,Ltd.
【Workshop name】 Proposal for stamping die production for car components
【Lecturer】 Mold project sales section Domestic sales department Manager Itsusei Kurosaki
| 【Application Method】 | Please visit our website (Click here) |
606 Conference Room
(+81)-3-3391-1311 A3-② E3003:
Euro Techno Inc.
【Workshop name】 The new µCMM from ALICONA
【Lecturer】 Fumihiko Ohara
15:00～16:00
A3-② E3003: Euro Techno Inc.
【Workshop name】 The new µCMM from ALICONA
【Lecturer】 Fumihiko Ohara
| 【Application Method】 | Please contact us by email (info@eurotechno.co.jp） |
607 Conference Room
A3-③ E6013:KURAKI CO., LTD
【Workshop name】 Efficiency of profile milling for injection molding die by horizontal machining center
【Lecturer】 Yuki Akiba
608 Conference Room
A3-④ E5030:Computer Engineering & Consulting, Ltd.
【Workshop name】 Introduction of IoT at processing site and data utilization by wearable terminal
【Lecturer】 Hiroaki Matsui,Digital Industry Business Group First Sales Division
11:00～12:00
B1-② W1035:
OSG Corporation
【Workshop name】 A Brand solution
【Lecturer】 Design Center - Engineering & Development engineer
11:00～12:00
B1-③ W2020:
THK CO.,LTD.
【Workshop name】 High precision positioning technology at nm level by precision stage
【Lecturer】 Makoto Iizumi
11:00～12:00
B1-④ E5036:
ITOCHU Techno-Solutions Corparation
【Workshop name】 CUTTING SIMULATION
【Lecturer】 Hisao Eto
13:00～14:00
B2-① E5009:
JBM Corporation
【Workshop name】 What's new in Mastercam 2019
【Lecturer】 Takashi Yamamoto
13:00～14:00
B2-② W1048:
MITSUBISHI MATERIALS CORPORATION
【Workshop name】 High-efficiency machining for aircraft parts
【Lecturer】 Syogo Tanaka,Aerospace Dept.
13:00～14:00
B3-① W1022:
Oerlikon Nihon Balzers Coating Co., Ltd.
【Workshop name】 High Performance Solutions for cutting tool industry
【Lecturer】 Dr. Denis Kurapov
15:00～16:00
B3-③ W1047:
NACHI-FUJIKOSHI CORP.
【Workshop name】 Introduction of latest tool
【Lecturer】 Toshihiro Hoshiba
15:00～16:00
605 Conference Room
(+81)-568-74-5311 B1-① E7118:
Blum-Novotest K.K
【Workshop name】 Innovative laser measuring system LC50-DIGILOG
【Lecturer】 Rikiya Kato, Sales Engineering Manager
11:00～12:00
B1-① E7118: Blum-Novotest K.K
【Workshop name】 Innovative laser measuring system LC50-DIGILOG
【Lecturer】 Rikiya Kato, Sales Engineering Manager
606 Conference Room
B1-② W1035: OSG Corporation
【Workshop name】 A Brand solution
【Lecturer】 Design Center - Engineering & Development engineer
607 Conference Room
B1-③ W2020: THK CO.,LTD.
【Workshop name】 High precision positioning technology at nm level by precision stage
【Lecturer】 Makoto Iizumi
| 【Application Method】 | Please visit our website (Click here) |
608 Conference Room
B1-④ E5036:ITOCHU Techno-Solutions Corparation
【Workshop name】 CUTTING SIMULATION
【Lecturer】 Hisao Eto
| 【Application Method】 | Please contact us by email (advantedge@ctc-g.co.jp） |
605 Conference Room
B2-① E5009:JBM Corporation
【Workshop name】 What's new in Mastercam 2019
【Lecturer】 Takashi Yamamoto
| 【Application Method】 | Please visit our website (Click here) |
606 Conference Room
B2-② W1048:MITSUBISHI MATERIALS CORPORATION
【Workshop name】 High-efficiency machining for aircraft parts
【Lecturer】 Syogo Tanaka,Aerospace Dept.
| 【Application Method】 | Please visit our website (Click here) |
607 Conference Room
(+81)-267-32-5905 B2-③ E5018:
CITIZEN MACHINERY CO.,LTD.
【Workshop name】 The latest technical information
【Lecturer】 Shigeo Yanagidaira
13:00～14:00
B2-③ E5018:CITIZEN MACHINERY CO.,LTD.
【Workshop name】 The latest technical information
【Lecturer】 Shigeo Yanagidaira
| 【Application Method】 | Please contact us by phone |
608 Conference Room
(+81)-3-5493-1020 B2-④ W1014:
UNION TOOL CO.
【Workshop name】 Product Information: Highly efficient milling series for Stainless Steels & New series for hard material milling
【Lecturer】 Hideki Osaki
15:00～16:00
B2-④ W1014:UNION TOOL CO.
【Workshop name】 Product Information: Highly efficient milling series for Stainless Steels & New series for hard material milling
【Lecturer】 Hideki Osaki
| 【Application Method】 | Please visit our website (Click here) |
605 Conference Room
B3-① W1022:Oerlikon Nihon Balzers Coating Co., Ltd.
【Workshop name】 High Performance Solutions for cutting tool industry
【Lecturer】 Dr. Denis Kurapov
606 Conference Room
(+81)-45-478-5340 B3-② E7075:
HMS Industrial Networks K.K.
【Workshop name】 Start Preventive Maintenance with Remote Solutions!
【Lecturer】 Tadashi Watanabe
15:00～16:00
B3-② E7075:HMS Industrial Networks K.K.
【Workshop name】 Start Preventive Maintenance with Remote Solutions!
【Lecturer】 Tadashi Watanabe
| 【Application Method】 | Please visit our website (Click here) |
607 Conference Room
B3-③ W1047:NACHI-FUJIKOSHI CORP.
【Workshop name】 Introduction of latest tool
【Lecturer】 Toshihiro Hoshiba
608 Conference Room
(+81)-45-650-1612 B3-④ E5035:
Beckhoff Automation K.K.
【Workshop name】 IoT connectivity and intelligence added to machine tools by software CNC
【Lecturer】 Junichi Kouguchi
B3-④ E5035:Beckhoff Automation K.K.
【Workshop name】 IoT connectivity and intelligence added to machine tools by software CNC
【Lecturer】 Junichi Kouguchi
| 【Application Method】 | Please contact us by phone Please visit our website (Click here) Please contact us by email (info@beckhoff.co.jp） |
11:00～12:00
C1-① E3019:
Roku-Roku Sangyo, Ltd
【Workshop name】 The latest micro fine machining center and on-board measurement technology
【Lecturer】 Yoshichika Ohishi,Engineering Headquarters Research & Development Center
11:00～12:00
C1-④ E5011:
C&G SYSTEMS INC.
【Workshop name】 Introduction of process management system "AIQ"
【Lecturer】 Katsunori Tashiro
13:00～14:00
C2-① E8001:
DMG MORI CO., LTD.
【Workshop name】 MATRIS, ever-growing/evolving modularized automation system
【Lecturer】 Satoru Kashiwagi
13:00～14:00
C3-① E7032:
TOKYO SEIMITSU CO., LTD.
【Workshop name】 Introducing of The Ultra High Accuracy Flagship Model "Roundness / Cylindrical Profile Measuring Instrument
【Lecturer】 Hideki Morii
15:00～16:00
C3-② W1052:
NS TOOL CO.,LTD.
【Workshop name】 A basic technology and application cases to realize high-precision machining by small-diameter end mill.
【Lecturer】 Takamasa Endo, Manager, R&D sect., R&D dept.
15:00～16:00
C3-③ W1045:
SANDVIK K.K.
【Workshop name】 Global level solutions for machining on the latest aerospace component.
【Lecturer】 Toshikazu Kawamukai
15:00～16:00
605 Conference Room
C1-① E3019: Roku-Roku Sangyo, Ltd
【Workshop name】 The latest micro fine machining center and on-board measurement technology
【Lecturer】 Yoshichika Ohishi,Engineering Headquarters Research & Development Center
606 Conference Room
(+81)-72-869-5810 C1-② W2021:
NIKKEN KOSAKUSHO WORKS,LTD.
【Workshop name】 Next-Generation Machine Tool Peripherals
【Lecturer】 Kazuhisa Fujimoto
11:00～12:00
C1-② W2021: NIKKEN KOSAKUSHO WORKS,LTD.
【Workshop name】 Next-Generation Machine Tool Peripherals
【Lecturer】 Kazuhisa Fujimoto
| 【Application Method】 | Please contact us by phone Please contact us by email (honbu@nikken-kosakusho.co.jp） |
607 Conference Room
(+81)-52-739-1080 C1-③ W1034:
IWATA TOOL Co.,Ltd
【Workshop name】 The mold producing process shortened by drilling.And about PCD,CBN.
【Lecturer】 Masanao Iwata/Koichiro Noda
11:00～12:00
C1-③ W1034: IWATA TOOL Co.,Ltd
【Workshop name】 The mold producing process shortened by drilling.And about PCD,CBN.
【Lecturer】 Masanao Iwata/Koichiro Noda
| 【Application Method】 | Please visit our website (Click here) |
608 Conference Room
C1-④ E5011:C&G SYSTEMS INC.
【Workshop name】 Introduction of process management system "AIQ"
【Lecturer】 Katsunori Tashiro
| 【Application Method】 | Please visit our website (Click here) |
605 Conference Room
C2-① E8001:DMG MORI CO., LTD.
【Workshop name】 MATRIS, ever-growing/evolving modularized automation system
【Lecturer】 Satoru Kashiwagi
606 Conference Room
(+81)-6-6794-0167 C2-② W1046:
DIJET INDUSTRIAL CO.,LTD.
【Workshop name】 New challenge to high efficient cutting
【Lecturer】 Toshiyuki Yamamoto
13:00～14:00
C2-② W1046:DIJET INDUSTRIAL CO.,LTD.
【Workshop name】 New challenge to high efficient cutting
【Lecturer】 Toshiyuki Yamamoto
| 【Application Method】 | Please contact us by email (dijethansoku@yahoo.co.jp） |
607 Conference Room
(+81)-3-96-3161 C2-③ E1030:
AMADA HOLDINGS CO., LTD.
【Workshop name】 The technology of fiber laser beam open up the future of processing
【Lecturer】 Takaaki Yamanashi, Blanking Machinery Development HQ Senior Executive General Manager
13:00～14:00
C2-③ E1030:AMADA HOLDINGS CO., LTD.
【Workshop name】 The technology of fiber laser beam open up the future of processing
【Lecturer】 Takaaki Yamanashi, Blanking Machinery Development HQ Senior Executive General Manager
| 【Application Method】 | Please contact us by email (sc_unei@amada.co.jp） |
608 Conference Room
(+81)-3-5769-5010 C2-④ E2005:
GF Machining Solutions Ltd.
【Workshop name】 High precision machining possibilities by advanced manufacturing.
【Lecturer】 Yoichiro Hosoda
15:00～16:00
C2-④ E2005:GF Machining Solutions Ltd.
【Workshop name】 High precision machining possibilities by advanced manufacturing.
【Lecturer】 Yoichiro Hosoda
| 【Application Method】 | Please contact us by phone Please contact us by email (info.gfms.jp@georgfischer.com） |
605 Conference Room
C3-① E7032:TOKYO SEIMITSU CO., LTD.
【Workshop name】 Introducing of The Ultra High Accuracy Flagship Model "Roundness / Cylindrical Profile Measuring Instrument
【Lecturer】 Hideki Morii
| 【Application Method】 | Please visit our website (Click here) |
606 Conference Room
C3-② W1052:NS TOOL CO.,LTD.
【Workshop name】 A basic technology and application cases to realize high-precision machining by small-diameter end mill.
【Lecturer】 Takamasa Endo, Manager, R&D sect., R&D dept.
| 【Application Method】 | Please visit our website (Click here) |
607 Conference Room
C3-③ W1045:SANDVIK K.K.
【Workshop name】 Global level solutions for machining on the latest aerospace component.
【Lecturer】 Toshikazu Kawamukai
| 【Application Method】 | Please contact us by email (CoromantJapan@sandvik.com） |
608 Conference Room
(+81)-566-71-1060 C3-④ WA011:
Ayabo Corporation
【Workshop name】 Model-based development tool using the innovative theory of self-excited vibration caused by time delay 2nd edition!
【Lecturer】 Ayabo Corporation Katsushi Fujii／OITA UNIVERSITY Takahiro Ryu／KAGOSHIMA UNIVERSITY Kenichiro Matsuzaki
C3-④ WA011:Ayabo Corporation
【Workshop name】 Model-based development tool using the innovative theory of self-excited vibration caused by time delay 2nd edition!
【Lecturer】 Ayabo Corporation Katsushi Fujii／OITA UNIVERSITY Takahiro Ryu／KAGOSHIMA UNIVERSITY Kenichiro Matsuzaki
| 【Application Method】 | Please contact us by phone Please contact us by email (info@ayabo.com） |
13:00～14:00
D2-① W1029:
Mitsubishi Hitachi Tool Engineering, Ltd.
【Workshop name】 We are introduce latest cutting by using GALLEA-series and new products
【Lecturer】 Yoshinobu Kido Senior Engineer Global solution center
13:00～14:00
D2-② W1044:
FUJISEIKO LIMITED
【Workshop name】 Development of tools that contributes to Flexible & High Efficiency machining of automotive parts
【Lecturer】 Naoki Shinoda,Akihiro Fujii,Yoshikazu Akita
15:00～16:00
D3-① W1045:
SANDVIK K.K.
【Workshop name】 Latest/Future Machining for Automotive transmission component
【Lecturer】 Hiroshi Suzuki
605 Conference Room
D2-① W1029: Mitsubishi Hitachi Tool Engineering, Ltd.
【Workshop name】 We are introduce latest cutting by using GALLEA-series and new products
【Lecturer】 Yoshinobu Kido Senior Engineer Global solution center
606 Conference Room
D2-② W1044: FUJISEIKO LIMITED
【Workshop name】 Development of tools that contributes to Flexible & High Efficiency machining of automotive parts
【Lecturer】 Naoki Shinoda,Akihiro Fujii,Yoshikazu Akita
| 【Application Method】 | Please contact us by email (y_hachisuka@c-max.co.jp） |
605 Conference Room
D3-① W1045: SANDVIK K.K.
【Workshop name】 Latest/Future Machining for Automotive transmission component
【Lecturer】 Hiroshi Suzuki
| 【Application Method】 | Please contact us by email (CoromantJapan@sandvik.com） |
11:00～12:00
E1-② E7065:
HARTING K.K.
【Workshop name】 Internet of Things (IoT) for Production Site - enabled by Industrial RasPi
【Lecturer】 Kenji Nogata
13:00～14:00
E2-① WA015:
IHI Corporation
【Workshop name】 Hauzer State of the art tool coating technologies
【Lecturer】 Michiel Eerden, Masaaki Takizawa
13:00～14:00
605 Conference Room
(+81)-3-5674-1161 E1-① E2027:
Captain Industries, Inc.
【Workshop name】 INNOVATION for On Machine Measuring*Result will be evaluated by Insight Gauging System
【Lecturer】 Yutaka Ozeki
11:00～12:00
E1-① E2027: Captain Industries, Inc.
【Workshop name】 INNOVATION for On Machine Measuring*Result will be evaluated by Insight Gauging System
【Lecturer】 Yutaka Ozeki
| 【Application Method】 | Please visit our website (Click here) |
606 Conference Room
E1-② E7065: HARTING K.K.
【Workshop name】 Internet of Things (IoT) for Production Site - enabled by Industrial RasPi
【Lecturer】 Kenji Nogata
| 【Application Method】 |
Please visit our website (Click here) Please contact us by email (jp@HARTING.com） |
605 Conference Room
E2-① WA015: IHI Corporation
【Workshop name】 Hauzer State of the art tool coating technologies
【Lecturer】 Michiel Eerden, Masaaki Takizawa
| 【Application Method】 | Please contact us by email (info@hauzer.jp） |
606 Conference Room
(+81)-3-5739-6761 E2-② E7050:
KOBE STEEL, LTD.
【Workshop name】 KOBELCO Coating Technologies and Applications
【Lecturer】 Oishi Akira,Advanced Procucts & Technology Dept.
E2-② E7050: KOBE STEEL, LTD.
【Workshop name】 KOBELCO Coating Technologies and Applications
【Lecturer】 Oishi Akira,Advanced Procucts & Technology Dept.
13:00～14:00
606 Conference Room
0120-78-2070 F2-② E7085:
ifm efector co.ltd.
【Workshop name】 Application of vibration sensor for machine tool
【Lecturer】 Edil Alvarez
13:00～14:00
F2-② E7085: ifm efector co.ltd.
【Workshop name】 Application of vibration sensor for machine tool
【Lecturer】 Edil Alvarez
| 【Application Method】 | Please contact us by phone Please contact us by email (yoko.aida@ifm.com） |
607 Conference Room
(+81)-3-3247-0519 F2-③ E7107:
Schmersal Japan K.K.
【Workshop name】 Design of safe machines Validation service provided by tec.nicum / Introduction of safety devices of Schmersal
【Lecturer】 Yasuhiko Shirai / Yuichi Kobayashi
F2-③ E7107: Schmersal Japan K.K.
【Workshop name】 Design of safe machines Validation service provided by tec.nicum / Introduction of safety devices of Schmersal
【Lecturer】 Yasuhiko Shirai / Yuichi Kobayashi
| 【Application Method】 | Please contact us by email (info@schmersal.co.jp） |
* Please note that the workshop hold by CemeCon K.K., which had been scheduled on November 6 (Tue.) 13:00 - 14:00 in the 605 Conference Room has been cancelled.