AM展区讲演会和研讨会
南2大厅 主办方研讨会场
  • 参加讲演会和研讨会需要提前申请。只有在有空位的情况下,我们才会当天受理您参加。
  • 讲师和议程如有更改,恕不另行通知。
  • 参加讲演会和研讨会需要另行注册。
JIMTOF2022 讲演会和研讨会

Nov. 8 (Tue.)
Nov. 9 (Wed.)
Nov. 10 (Thu.)
Nov. 11 (Fri.)
Nov. 12 (Sat.)
Nov. 13 (Sun.)

November 8 (Tue.)
Free of charge
Keynote Speech

November 8 (Tue.) 10:30~11:30

Toward the innovation of "mono-zukuri" using a metal-based additive manufacturing

Additive Manufacturing (AM) has undergone rapid development in the last decade, and it has been recognized as a remarkable technique owing to its capacity to produce parts with complex and functional geometries. In this seminar, we will focus on AM using metallic materials, and introduce advantages and challenges, world trends, future prospects.

*Application has been closed

Professor
Advanced Manufacturing Technology Institute (AMTI),
Kanazawa University
Tatsuaki Furumoto
Free of charge
Special Lecture

November 8 (Tue.) 12:00〜13:00

Latest Technical Trend of 3D Printing from Europe and The US

Europe and The United States are actively working on the technology and use of 3D printers. Face-to-face exhibitions resumed in Europe and The US in late 2021. J3DPA visits these exhibitions to research new technologies and new products. Several topics from these investigations will be introduced.

*Application has been closed

Researcher
Japan 3D Printing Industrial Technology Association
Hideaki Oba
Free of charge
Special Lecture

November 8 (Tue.) 15:00〜16:00

A Practical Guide to 3D Printing

I will explain the basic technology of resin 3D printers. In addition, I will explain the relationship between each method of 3D printer and the materials that can be used. Why does simple FDM (MEX) printing fail with ABS even though success with PLA ? I answer these questions that we usually feel when using a 3D printer.

*Application has been closed

Researcher
Japan 3D Printing Industrial Technology Association
Kiyoshi Yamaguchi
November 9 (Wed.)
Free of charge
Special Symposium

November 9 (Wed.)  10:00~11:00

Female engineers’ insight of manufacturing world

Three female young engineers in aerospace field will have a panel discussion to talk about the attractive manufacturing world.

*Application has been closed

(Panelist #1)
Engineer/Flight Director
Human Spaceflight Technology Center, Human Spaceflight Technology Directorate,
Japan Aerospace Exploration Agency (JAXA)
Chisato Sekigawa
(Panelist #2)
Assistant manager
Propulsion Engineering Group, Space Development Department, Aero Engine,
Space & Defense Business Area, IHI corporation
Sakiko Ishihara
(Panelist #3)
Research associate
Department of Aerospace Engineering, College of Science and Technology,
Nihon University
Ayana Banno
(Moderator)
Manager
Sales & Marketing Dept.,
IHI AEROSPACE Co., Ltd.
Mihoko Fukunaga
Free of charge
Special Lecture

November 9 (Wed.) 11:30〜12:30

Regarding production technology which causes Game Change
(Production technology required for PWT products in the future)

In recent years, the environment surrounding the automobile industry is changing at a tremendous rate.  As the structure of powertrain products changes drastically, the method of “monozukuri” is about to change drastically. I’d like to explain the future powertrain production technology evolution and outlook.

*Application has been closed

Expert Leader (New Product and Process)
Powertrain Production Engineering and Development Division,
Nissan Motor Co, Ltd.
Noriyuki Shiwaku
Free of charge
Special Lecture

November 9 (Wed.) 13:30~16:30

AM Seminar by Japan Machine Tool Builders' Association

13:30~15:15 Introduction of the latest technology AM equipment manufacturers
(Presenters) Sodick Co.,Ltd., Okuma Corporation, Mitsubishi Electric Corporation, Yamazaki Mazak Corporation, JEOL Ltd., DMG Mori Co.,Ltd., Matsuura Machinery Corporation
15:30~16:30  Panel Discussion
(Facilitator) Prof. Dr. Tatsuaki FURUMOTO (Kanazawa University)
(Panelist) Prof. Dr. Hiroyuki SASAHARA (Tokyo University of Agriculture and Technology) and Seminar Presenter
Click here for details

*Application has been closed

Japan Machine Tool Builders' Association
November 10 (Thu.)
Free of charge
Special Lecture

November 10 (Thu.)  10:00~11:15

Developments and Prospects of Next-Generation Industrial 3D Printers
– Laser Beam System -

The achievements and challenges of “Next-generation industrial 3D printers project” are reported. In addition, regarding the laser-beam powder bed fusion process, the powder recoating and melting-solidification phenomena and the development of monitoring-feedback system are introduced.

*Application has been closed

President, TRAFAM Fundamental Technology for Next Generation Research Institute
Professor, Kindai University
Hideki Kyogoku
Free of charge
Special Lecture

November 10 (Thu.) 11:25~12:40

Development of next-generation industrial 3D printers and future trend -Electron beam type

The research and development results of the first phase project using the electron beam method will be outlined. In addition, the research and development results of the second project currently underway will be explained. Furthermore, the future prospects will be described based on these results.

*Application has been closed

Professor
Institute for Materials Research, Tohoku University
Akihiko Chiba
Free of charge
Special Lecture

November 10 (Thu.) 13:30~14:15

Development of electron beam metal 3D printer

Introducing JEOL Ltd.'s electronic beam powder bed fusion metal 3D printer JAM-5200EBM, which has been successfully commercialized based on the research results of a national project.

*Application has been closed

General Manager Advanced & Fundamental Technology Center
JEOL Ltd.
Hironobu Manabe
Free of charge
Special Lecture

November 10 (Thu.) 14:20~15:05

Development of EB/PBF 3D Printer (II)

Following explanation of EB processing, it is presented newly developed EB/PBF 3D printer has one of the world's largest build sizes and highest build speeds, also a released small-size EB/PBF 3D printer that applies the fruits.

*Application has been closed

TECHNICAL ADVISOR
TADA ELECTRIC CO., LTD.
Junji Miyata
Free of charge
Special Lecture

November 10 (Thu.) 15:10~15:55

Development of a laser DED metal 3D printer

The DED printing method is used for manufacturing large parts and coating functional materials. A monitoring system for assuring printing quality and high precision deposition nozzles are required for its widespread use. This presentation will explain the results of development at TRAFAM and recent technological trends.

*Application has been closed

Executive Vice President and CTO
NIDEC MACHINE TOOL CORPORATION
Haruhiko Niitani
November 11 (Fri.)
Free of charge
Special Lecture

November 11 (Fri.)  10:30~11:50

"Emergent Circular Design and Digital Manufacturing"

The speaker will talk about the new future concept of recycling and upcycling with digital transformation and 3D printing technologies.

[collaboration : Japan 3D Printing Industrial Technology Association]

*Application has been closed

Professor / Director
Faculty of Environment and Information Studies, Keio University / Digital Manufacturing and Design Research Center for Emergent Circularity, Keio University Global Research Institute
Hiroya Tanaka
Free of charge
Special Speech

November 11 (Fri.) 13:30~14:30

How to lower AM costs of final parts.

AM is already used as one of the final parts manufacturing technologies. As with the conventional manufacturing technology, AM have the points of reducing costs (building cost, post-processing cost, quality cost, etc.). This program will show these points and examples.

*Application has been closed

Expert, Additive Manufacturing
TÜV SÜD Japan Ltd.
Chiyo Nagano
Free of charge
Special Speech

November 11 (Fri.) 15:00~16:00

Workflow from introduction of AM machine to process design for final parts manufacturing.

This program will explain a workflow from introduction of AM machine to process designing for quality assured AM final parts manufacturing, according to the international standards ISO/ASTM.

*Application has been closed

Expert, Additive Manufacturing
TÜV SÜD Japan Ltd.
Chiyo Nagano
November 12 (Sat.)
Free of charge
Special Lecture

November 12 (Sat.) 10:30~13:00

Difference between cutting and Additive Manufacturing ~Material maker, machine maker, service bureau compared~

We will compare and explain the difference between cutting and AM from materials, machine tools, and contract processing companies, and tell you what kind of cases are suitable for AM. In addition, we will hold a talk session with explainers to explore how to utilize AM by exchanging opinions with each industry.

*Application has been closed




Managing Director
Japanese Society of Additive Manufacturing
Toshiyuki Sawakoshi
Free of charge
Special Lecture

November 12 (Sat.) 14:00~15:00

Novel Soft Manufacturing Developed by 3D Printing

3D printers have been commercialized for hard materials such as metals and rigid plastics. On the other hand, 3D printers for soft matter such as polymer gels and food products are still at the laboratory level. SWEL is investigating 3D gel printers for practical use.

*Application has been closed

Professor, PI of SWEL
Soft & Wet mater Engineering Lab, Yamagata University
Hidemitsu Furukawa
November 13 (Sun.)
Free of charge
Special Lecture

November 13 (Sun.) 14:00~15:00

Recent Trend and Perspective on Metal Additive Manufacturing

Recently, metal additive manufacturing technology has been developed rapidly and thereby introduced in various fields. The trend of the latest development of metal 3D printers and related materials are reported, and the perspective of metal additive manufacturing is discussed.

*Application has been closed

President, TRAFAM Fundamental Technology for Next Generation Research Institute
Professor, Kindai University
Hideki Kyogoku